Marine Grade Aluminum Square Bar 5052 5A02

Marine-grade aluminum square bars 5052 and 5A02 are two commonly used aluminum alloy materials in marine and corrosive environments, known for their excellent corrosion resistance and mechanical properties.

Marine Grade Aluminum Square Bar 5052 and 5A02 have certifications from classification societies such as CCS, DNV, NK, ABS, BV, LR, and KR, ensuring that their quality fully complies with global maritime standards.

Both 5052 and 5A02 aluminum alloys are excellent marine-grade materials. If better formability and weldability are required, 5052 is the preferred choice. If higher strength is needed, then 5A02 should be considered.

Marine-grade aluminum square bars

The specification of 5052 5A02 marine grade aluminum square bar

Specification
Alloy	5052 5A02
Temper	O, H112
Side length	8-320MM
Length	1000mm-6000mm
Standard	GB/T 26006-2010 GB/T14846-2008 GB/T6892-2015 EN 755

5052 Marine Aluminum Square Bar

5052 aluminum alloy has excellent resistance to saltwater corrosion, moderate strength, and is commonly used in structural components that require a certain level of strength and corrosion resistance.
5A02 Marine Aluminum Square Bar

Compared to 5052, 5A02 has slightly higher strength and is easy to extrude, making it suitable for applications that need to bear larger loads or require higher strength and durability in demanding environments.

Mechanical properties of Marine Grade Aluminum Square Bar 5052 5A02

Mechanical properties of 5052 aluminium square bar for marine use

Alloy	Temper	Size/mm	Tensile strength RｍMPa	Extension strength RP0.2/Mpa	Elongation ％
					A	A_{50 mm}
			NO LESS THAN
5052	O, H112	ALL	170	70	15	13

Mechanical properties of Extruded 5A02 aluminium square bar for marine use

Alloy	Temper	Diameter/mm	Tensile strength RｍMPa	Extension strength RP0.2/Mpa	Elongation ％
					A50 ｍｍ	A
			NO LESS THAN
5A02	O, H112	25.00-150.00	≤225	-	10		-

Chemical composition of marine grade aluminum 5052 5A02 square bars

Chemical composition of marine grade aluminum 5052 square bars

Chemical composition
Al	Rem
Si	≤0.25
Fe	≤0.40
Cu	≤0.10
Mn	≤0.10
Mg	2.2-2.8
Cr	0.15-0.35
Zn	≤0.10
Note:Each:≤0.05;Total:≤0.15

Chemical composition of marine grade aluminum 5A02 square bars

Chemical composition
Al	REM
Si	≤0.40
Fe	≤0.40
Cu	≤0.10
Mn	0.15-0.40
Mg	2.0-2.8
Ti	≤0.15
Zn	-
Note:Each:≤0.05;Total:≤0.15

Applications of Marine Grade Aluminum Square Bar 5052 and 5A02

The 5052 and 5A02 aluminum square bars play important roles in shipbuilding. The 5052 aluminum square bar, with its excellent formability and weldability, is widely used in components such as hull structures, bulkheads, and interiors. In contrast, the 5A02 aluminum square bar, known for its superior strength and corrosion resistance, is suitable for critical components like hull structures, deck equipment, and fuel tanks.

Applications of 5052 Marine Grade Aluminum Square Bar

The 5052 extruded aluminum square bar is an essential material in shipbuilding, primarily used for constructing hull structures, including keels, frames, bottom plates, and side plates. This aluminum alloy possesses excellent strength and stiffness, effectively resisting water pressure and external environmental impacts, ensuring the stability and safety of the vessel.

Additionally, the 5052 aluminum square bar is widely used in the manufacturing of bulkheads and partition walls, which require high strength and corrosion resistance to ensure the vessel's watertightness and structural integrity. Within the ship's interior spaces, 5052 H112 aluminum square bars are commonly used to create steps and handrails, providing a safe passage environment for passengers and crew.

In terms of equipment support, the 5052 aluminum square bar effectively supports various equipment on board, such as engines, pump stations, and piping, thanks to its lightweight and corrosion-resistant properties, providing reliable support. Furthermore, it can also be used for decorative and interior components of the ship, such as handrails, door frames, and decorative panels, featuring a smooth surface that is easy to clean and maintain.

Applications of 5A02 Marine Grade Aluminum Square Bar

The 5A02 extruded aluminum marine-grade square bar is used in structural parts of the hull, including bottoms, bulkheads, and cabin walls. With its good strength and corrosion resistance, it can withstand various stresses and pressures during navigation, ensuring long-lasting durability.

The 5A02 aluminum square bar is also suitable for deck equipment and structures, such as ladders, railings, and barriers, characterized by its lightweight and high strength, providing stable support and protection. Additionally, it is used to manufacture marine fuel tanks, ensuring the safe storage of fuel and lubricants with good corrosion resistance and sealing properties.

Inside the vessel, the 5A02 aluminum square bar can be used for cabin partitions, furniture, and storage cabinets, demonstrating good processing performance and the ability to be flexibly customized according to the ship's design requirements.

Marine aluminum products you may be interested in

5052 O H112 Marine Grade Aluminum Bar

5052 O H112 Marine Grade Aluminum Rod is a rod made from 5052 aluminum alloy that is fully annealed to improve workability and tempered to provide strength and resistance suitable for marine applications.
5059 5086 Marine Grade Aluminum Bars

Marine-grade aluminum rods such as 5059 and 5086 combine corrosion resistance, strength and lightweight properties, making them an indispensable material in a variety of marine applications where durability and reliability are important.
5083 5383 O H112 Marine Grade Aluminum Bars

5083 5383 O H112 Marine Grade Aluminum Bars are certified by CCS, DNV, NK, CCS, ABS, BV, LR, KR and other classification societies, and their quality fully complies with world marine grade standards.
5456 5454 5754 Marine Grade Aluminum Bar

5456 5454 5754 Marine Grade Aluminum Bar has certification from CCS, DNV, NK, CCS, ABS, BV, LR, KR and other classification societies, and its quality fully complies with world marine grade standards.
6061 6082 Marine Aluminum Bars

The quality of 6061 6082 Marine Aluminum Bars fully meets the world's marine grade standards: CCS, DNV, NK, CCS, ABS, BV, LR, KR.
Marine Grade Aluminum Round Bar 5754 5454 5456

The quality of 5754, 5456, and 5454 marine-grade aluminum round bars fully meets the ship classification standards worldwide: CCS, DNV, NK, ABS, BV, LR, KR.
CSS D60 6082 T6 Marine Grade Aluminum Round Bar

The 6082 T6 Marine Grade Aluminum Round Bar is a high-strength aluminum alloy material, especially suitable for marine environments and other applications that require high corrosion resistance.
6061 Marine Grade Aluminum Square Bar

Marine Grade Aluminum Square Bar 6061 is widely used in marine environments due to its excellent corrosion resistance and strength. It has good weldability and machinability, making it suitable for manufacturing ships, marine structures, and equipment.
6082 Marine Grade Aluminum Square Bar

6082 marine grade aluminum square bar is an aluminum material with excellent mechanical properties and corrosion resistance, widely used in marine, shipbuilding, construction, and other fields.
5052 O H112 Marine Grade Aluminum Hexagon Bar

The 5052 O H112 aluminum alloy hexagonal bar has excellent corrosion resistance, making it suitable for the manufacture of ship components.
5052 O H112 Marine Grade Aluminum Round Bars

5052 aluminum round bars have excellent formability and durability, making them widely used in the manufacturing of ship components.
5052 marine grade aluminium checkered tread plate sheet

5052 Marine Grade Aluminum Checkerboard combines superior corrosion resistance, enhanced traction, lightweight construction and versatility, making it ideal for a variety of marine applications where durability and safety are critical.
5052 Marine Grade Aluminum Plate Sheet

In seawater environments, 5052 aluminum alloy has corrosion resistance properties that are unmatched by many other materials.
Marine Grade Aluminum Square Bar 5052 5A02

Marine-grade aluminum square bars 5052 and 5A02 are two commonly used aluminum alloy materials in marine and corrosive environments, known for their excellent corrosion resistance and mechanical properties.
5052 O marine aluminum plate

The 5052 O aluminum plate has excellent formability, making it suitable for the complex curved structures and cold-formed components of ship hulls.

Tags: Marine Grade Aluminum 5052